
Veto Pro Pac has come out with new wheeled tool bags – the Tech-LC and Tech-LCT join existing Xl and backpack options.
The Veto Tech-LC Wheeler and Tech-LCT Wheeler are similar, with the LCT model featuring an extra 2″ in vertical height for storing longer tools.
Both of the new tool bags feature Veto’s “V-Swap” modular system where you can swap at least one of the internal organizers for other types of panels, sold separately.
For simplicity, the images shown below are of the Tech-LC Wheeler.

The Veto Pro Pac Wheeler bags feature 5″ wheels, an extending handle, and a waterproof polypropylene base.

Both Tech-LC Wheeler and Tec-LCT Wheeler tool bags come with two V-Swap panels – a meter panel, and a tool panel.
Veto says that “the tool panel must remain in the bag (on either side)” but that the meter pocket panel can be swapped out for customization if desired.

With the included V-Swap panels, the Tech-LC Wheeler tool bag has 64 interior and exterior tool pockets of varying sizes, and the Tech-LCT Wheeler tool bag has 61.
Both tool bags feature front and back metal YKK locking zippers, 8″ electrical tape strap, t-bar tape roll chain, and magnetic screw catchers.
Max payloads are 85 lbs for the LC and 90 lbs for the LCT.
Dimensions: 12.5″ deep x 17″ wide x 19″ tall (LC), or 21″ tall (LCT)
The LC bag weighs 17.5 lbs when empty, and the LCT bag weighs 19 lbs empty.
Price: $440 for LC, $460 for LCT
V-Swap Options: bulk storage panel ($45 LC, $50 LCT), a laptop panel ($75 LC, $85 LCT).
Discussion
Veto Pro Pac tool bags offer a lot of space for hand tool and equipment storage, and tend to be well-organized, with their weight being a common downside. Adding wheels and an extending handle seems like a good move.
While pricey, these seem like versatile space-efficient ways to haul a lot of tools around.